HDAT2 is a diagnostic and recovery tool for hard drives. As it is burned on a CD/DVD or USB flash drive, the CD/DVD is called "a movie in a CD/DVD". Start by rebooting your computer and selecting the media as the bootable media you wish to use. This program uses a conventional DOS interface, meaning it does not have a graphical shell.application.
HDAT2 works with drives connected via SATA, ATA, ATAPI interfaces and supports any file system. As a general purpose program, the primary task is to find and recover disk spaces that host BAD. If you have an FAT12, 16 or 32 system, it can also check whether the booted region is good. Testing large-HDDs with volumes between 500GB and 7 GB can take quite a while to run. Based on observations of users, the program tests them in forty minutes or so. The BAD sectors cannot be fixed by the next decade.
diagnostics of the drive as well as its ability to display detailed technical details at the file level and the disk level, you will be able to appreciate this on the run up to disk-level diagnostics and recovery. HD AT2 has virtually no competition as it resides closest to the Victoria solution. however, it can still be used with modern media when running under Windows, but it hasn't been updated for some time.
HDAT2 is a free application that you can download. A USB memory device can be written to with the programs listed in this list.
- The tool compares the voltages between drives connected to SATA, USB, and ATAPI ports;
- The ability to detect and repair breaks in the system, allows for a faster recovery.
- A USB flash drive or optical disk is formatted as an image that must be taken from one.
- drives to provide detailed technical details;
- The MBR boot can be restored.